Thread: Limb sizes
View Single Post
  #4  
Old 05-30-2008, 08:04 AM
Monie's Avatar
Monie Monie is offline
Moose
 
Join Date: Jan 2008
Location: Kokomo, In.
Posts: 3,596
Default

Liberty Archery makes it. Here are the specs:

RISER - A357-T6 aluminum riser (same
material used for jet impeller blades)
BOW LENGTH - 20.5" axle to axle

DRAW LENGTHS - 25 1/2, 26 3/8, 26 7/8, 27 3/8, 28.0",
28 7/16", 28 3/4", 29 3/8", 30", 30 1/2", 31.0", 31 1/2", 32 "
Draw Length Not adjustable.
No modules, unique cam, cables, and string per draw
length.
DRAW WEIGHTS - 30-40#, 35-45#, 40-50#, 45-55#, 50-
60#,55-65#, 60-70#, 65-75#,72-82# (order by peak
weight)Draw weight is adjustable 10 lbs down from peak
weight
STABILIZER MOUNT - Center Front, 5” long fits case.
PEEP SIGHT - String angle requires special Liberty peeps.
SIGHTS - Most sights work fine, see accessories.
CAM - High speed, high let-off, split cable design.
LET-OFF- 85%, ask about 65% let-off
HOLDING WEIGHT - 10.5 lbs for 70 lb bow =85% let-off.
BRACE HEIGHT - 7"
ARROW SPEED IBO-308 fps, AMO-242 fps. Note longer
draw. Using allowed 4 grains/lb arrows speed is 338 fps.
HANDLE - Lightweight cushioned synthetic rubber angled
at 29 degrees. See photo in Design History.
STRING - Vapor Trail (prestretched) After 1/15/2006
CAMO - RealTree Hardwoods High Definition Green-Jordan
VIBRATION & NOISE REDUCTION
Sims - String Leeches & Bow Jacks cable silencers
BOW PRESS - Is not needed to replace or change the
string. Not needed to replace a cable. Bow press is only
need to replace cams or limbs. Most crossbow presses can
press the Liberty I. The Apple Archery crossbow center
($170) works great but in 95% of the cases is not needed..
__________________
If you're not leaning, no one can let you down.

http://www.huntsd.net/

http://www.beesource.com/forums/index.php

http://www.purgatoryironworks.com

Last edited by Monie; 05-30-2008 at 08:07 AM.
Reply With Quote